Klauke
Showing 49–96 of 178, by part number
50115375Klauke
Klauke 50115375 slot insert 11 x 20 mm, 50,115,375 Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. 11 x 20 mm
ABA article no. ABAAN-58842476
$929.07
Ships in 4 weeks
50115383Klauke
Klauke 50115383 hole insert D13x20mm for hole tool III Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. 13 x 20 mm
ABA article no. ABAAN-29003729
$929.07
Ships in 4 weeks
50115391Klauke
KLAUKE 50115391 slot use 17,0 x20mm, 50,115,391 Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. 17 x 20 mm
ABA article no. ABAAN-36122780
$929.07
Ships in 4 weeks
50176870Klauke
Klauke 50176870 stamp 50,176,870 47.0 mm, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-57980473
$65.54
Ships in 4 weeks
50183311Klauke
Klauke 50183311 Stamp 37.0mm Standard Knockout Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm .
ABA article no. ABAAN-85004241
$43.55
Ships in 4 weeks
50186353Klauke
Klauke 50186353 sheet metal punch standard 82mm max.3mm Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-43702450
$388.34
Ships in 4 weeks
50188860Klauke
Klauke 50188860 punchers 18.6 mm PG 11, 50,188,860 standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-95528722
$50.85
Ships in 4 weeks
50189050Klauke
Klauke 50189050 Standard stamp 70,6mm, hydraulically Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-88737688
$216.61
Ships in 4 weeks
50189069Klauke
Klauke 50189069 standard template 82mm, steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-68169350
$134.33
Ships in 4 weeks
50199757Klauke
KLAUKE 50199757 standard sheet metal punch system 74mm, 50,199,757 Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-84946732
$287.73
Ships in 4 weeks
50199803Klauke
KLAUKE 50199803 puncher Standard, 143,7mm max.3mm Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-92955567
$1,469.40
Ships in 4 weeks
50206680Klauke
Klauke 50206680 punchers 20.6 mm, standard knockout 50,206,680 Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-87674459
$50.85
Ships in 4 weeks
50206702Klauke
Klauke 50206702 punchers 25.4 mm ISO 25, 50,206,702 standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-89006383
$56.55
Ships in 4 weeks
50206761Klauke
Klauke 50206761 Blechl.Kugell.50,8mm , ISO Standard Knockout 50 Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-72283080
$141.03
Ships in 4 weeks
50206796Klauke
Klauke 50206796 Blechl.Kugell.63,5mm , ISO Standard Knockout 63 Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-15716051
$239.95
Ships in 4 weeks
50212141Klauke
KLAUKE 50212141 standard punchers , 66.7 mm Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-01996622
$287.73
Ships in 4 weeks
50212168Klauke
Klauke 50212168 sheet metal punch standard 95.3mm max.3mm Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-66641393
$890.01
Ships in 4 weeks
50225634Klauke
Klauke 50225634 punchers 22.5 mm PG 16, 50,225,634 standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-99476888
$50.85
Ships in 4 weeks
50244620Klauke
Klauke 50244620 Standard stamp 40,5mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-44259527
$50.25
Ships in 4 weeks
50244760Klauke
Klauke 50244760 punchers 32.5 mm ISO 32, 50,244,760 standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-80031500
$71.80
Ships in 4 weeks
50244779Klauke
Klauke 50244779 Blechl.Kugell.40,5mm , Standard Knockout ISO 40 Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-21302815
$101.49
Ships in 4 weeks
50253506Klauke
Klauke 50253506 Blechl.Kugell. 50,253,506 44.5 mm, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-78500122
$109.20
Ships in 4 weeks
50253727Klauke
Klauke 50253727 sheet metal punch standard 76.2mm max.3mm Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-17579254
$348.14
Ships in 4 weeks
50253832Klauke
KLAUKE 50253832 standard sheet metal punch system 70.6 mm Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-57071525
$287.73
Ships in 4 weeks
50254030Klauke
KLAUKE 50254030 standard sheet metal punch system Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-91112530
$388.34
Ships in 4 weeks
50294512Klauke
Klauke 50294512 Slug splitter pull bolt D11.1mm To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 11.1 to d: 19 .
ABA article no. ABAAN-32918493
$107.53
Ships in 4 weeks
50294520Klauke
Klauke 50294520 Greenlee draw bolt 19.0 x 140 mm, 50.29452 million To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 19 x 140 mm
ABA article no. ABAAN-98858154
$96.59
Ships in 4 weeks
50347330Klauke
Klauke 50347330 BB nut 9.5mm Single part for manual operation of sheet metal punches. 9.5mm
ABA article no. ABAAN-74620368
$53.04
Ships in 4 weeks
50368826Klauke
KLAUKE 50368826 stamp 50,368,826 28.3 mm, PG21 Manual and hydraulic Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-05920900
$33.33
Ships in 4 weeks
50601156Klauke
Klauke 50601156 tension bolt 6,3 x87 mm 50,601,156 for special shape punches To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 6.3 x 87 mm
ABA article no. ABAAN-13450269
$71.35
Ships in 4 weeks
50601172Klauke
Klauke 50601172 tension bolt 12.7 x 117.0 mm, 50,601,172 for special shape punches To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 12.7 x 117 mm
ABA article no. ABAAN-16507134
$84.97
Ships in 4 weeks
50601180Klauke
Klauke 50601180 draw bolt 19 x 171 mm, shape punch for Type: 50601180 Sales unit: 1 pc
ABA article no. ABAAN-79209513
$133.65
Ships in 4 weeks
50601652Klauke
Klauke 50601652 actuating nut 29.7mm Single part for manual operation of sheet metal punches. 12.7mm
ABA article no. ABAAN-73118765
$61.52
Ships in 4 weeks
50602357Klauke
Klauke 50602357 lock nut , Accessories for rectangular hole punch. 9.5mm
ABA article no. ABAAN-58715382
$81.06
Ships in 4 weeks
50602586Klauke
Klauke 50602586 lock nut , Accessories for rectangular hole punch. 12.7mm
ABA article no. ABAAN-68251554
$35.62
Ships in 4 weeks
50766803Klauke
Klauke 50766803 complete set ISO 16-40 76680, including tie bolts in plastic case Type: 76680 Sales unit: 1 pc
ABA article no. ABAAN-13264958
$1,371.14
Ships in 4 weeks
51069720Klauke
Klauke 51069720 die , Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-70843435
$21.10
Ships in 4 weeks
51300430Klauke
Klauke 51300430 draw bolt for hydraulic actuation D9.5x71mm To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 9.5 x 71 mm
ABA article no. ABAAN-14609355
$14.85
Ships in 4 weeks
52020113Klauke
Klauke 52020113 replacement screw , To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. 9.5 x 88 mm
ABA article no. ABAAN-81550868
$84.97
Ships in 4 weeks
52042827Klauke
Klauke 52042827 draw bolt for hydraulic actuation D9.5 to 19mm 122mm To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 9.5 to d: 19 .
ABA article no. ABAAN-60867722
$46.44
Ships in 4 weeks
52047818Klauke
DRAW STUD FOR HYDRAULIC OPERATION, SPEED PUNCH 19.0X121MM by Klauke
ABA article no. ABAAN-88689388
$61.41
Ships in 4 weeks
52055432Klauke
KLAUKE 52055432 SPEED PUNCH punch u.Matrize ISO20 Innovative threadless stamp profile, easiest and quickest handling as no screwing or unscrewing of the lock nut is required, suitable for sheet steel (St37), plastic and aluminum up to 3.5 mm thick, .
ABA article no. ABAAN-77548445
$69.79
Ships in 4 weeks
52055435Klauke
KLAUKE 52055435 SPEED PUNCH punch u.Matrize ISO32 Innovative threadless stamp profile, easiest and quickest handling as no screwing or unscrewing of the lock nut is required, suitable for sheet steel (St37), plastic and aluminum up to 3.5 mm thick, .
ABA article no. ABAAN-56462749
$99.94
Ships in 4 weeks
52055436Klauke
KLAUKE 52055436 SPEED PUNCH punch u.Matrize ISO40 Innovative threadless stamp profile, easiest and quickest handling as no screwing or unscrewing of the lock nut is required, suitable for sheet steel (St37), plastic and aluminum up to 3.5 mm thick, .
ABA article no. ABAAN-00436244
$127.51
Ships in 4 weeks
52055437Klauke
KLAUKE 52055437 SPEED PUNCH punch u.Matrize ISO50 Innovative threadless stamp profile, easiest and quickest handling as no screwing or unscrewing of the lock nut is required, suitable for sheet steel (St37), plastic and aluminum up to 3.5 mm thick, .
ABA article no. ABAAN-70061819
$219.24
Ships in 4 weeks
52055438Klauke
KLAUKE 52055438 SPEED PUNCH punch u.Matrize ISO63 Innovative threadless stamp profile, easiest and quickest handling as no screwing or unscrewing of the lock nut is required, suitable for sheet steel (St37), plastic and aluminum up to 3.5 mm thick, .
ABA article no. ABAAN-32896294
$268.98
Ships in 4 weeks
52055439Klauke
SPEED PUNCH, SPEED LOCK AND DRAW STUD 9.5MM, FOR ISO 16/20/25 & PG16 by Klauke
ABA article no. ABAAN-75921305
$95.91
Ships in 4 weeks
52066001Klauke
DRAW STUD FOR HYDRAULIC OPERATION, SPEED PUNCH 9.5 TO 19MM, 97MM by Klauke
ABA article no. ABAAN-65402250
$42.15
Ships in 4 weeks










