Klauke
Showing 1–48 of 178, by part number
50000420Klauke
Klauke 50000420 lag screw 9.5 x 40 mm, 51.00042 million for manual operation High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length. Tolerance deviations are reserved.
ABA article no. ABAAN-10442265
$21.33
Ships in 4 weeks
50024434Klauke
KLAUKE 50024434 standard matrix 50,024,434 70.6 mm, sheet metal punch for standard systems Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-43523833
$126.23
Ships in 4 weeks
50024450Klauke
Klauke 50024450 stamp 70.6mm 02445, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-32426442
$173.73
Ships in 4 weeks
50040588Klauke
Klauke 50040588 Standard Stamp 57.2mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-21482959
$82.29
Ships in 4 weeks
50040596Klauke
Klauke 50040596 standard die 57.2mm knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-90017631
$76.49
Ships in 4 weeks
50041754Klauke
Klauke 50041754 Standard stamp 74mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-65667316
$173.73
Ships in 4 weeks
50041770Klauke
Klauke 50041770 standard die 74mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-05333384
$126.23
Ships in 4 weeks
50041800Klauke
Klauke 50041800 stamp 50,041,800 89.8 mm, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-07908864
$216.61
Ships in 4 weeks
50041835Klauke
Klauke 50041835 die 50,041,835 89.8 mm, standard knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-39767157
$143.37
Ships in 4 weeks
50042327Klauke
Klauke 50042327 standard 50.8mm punches, knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-15610494
$68.67
Ships in 4 weeks
50042351Klauke
KLAUKE 50042351 standard template 12.7mm, PG7 PG7 Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-25086377
$16.97
Ships in 4 weeks
50042459Klauke
Klauke 50042459 Stamp 54.0mm Standard Knockout Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm .
ABA article no. ABAAN-85244569
$74.47
Ships in 4 weeks
50042483Klauke
Klauke 50042483 Standard stamp 47,6mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-32296948
$65.54
Ships in 4 weeks
50042491Klauke
Klauke 50042491 standard template 47,6mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-70067742
$56.17
Ships in 4 weeks
50042521Klauke
Klauke 50042521 Standard stamp 66.7mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-33180172
$138.90
Ships in 4 weeks
50042564Klauke
Klauke 50042564 Standard die 44.5mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-00294639
$43.32
Ships in 4 weeks
50042572Klauke
Klauke 50042572 Standard Stamp 44.5mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-37186719
$57.95
Ships in 4 weeks
50042580Klauke
Klauke 50042580 die 50,042,580 76.2 mm, standard Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-10173101
$134.33
Ships in 4 weeks
50042599Klauke
Klauke 50042599 stamp 50,042,599 76.2 mm, standard knockout Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm .
ABA article no. ABAAN-84902904
$202.88
Ships in 4 weeks
50046381Klauke
KLAUKE 50046381 lock nut , for square holes Accessories for Sub-Min-D hole punches.
ABA article no. ABAAN-13061318
$27.14
Ships in 4 weeks
50052284Klauke
Klauke 50052284 use 8.5 mm hole 50,052,284 for Punching tool I Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. d: 8.5 mm
ABA article no. ABAAN-94581600
$295.32
Ships in 4 weeks
50052292Klauke
Klauke 50052292 use hole 50,052,292 11.0 mm, hole for tool I Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. d: 11 mm
ABA article no. ABAAN-45458422
$295.32
Ships in 4 weeks
50052306Klauke
Klauke 50052306 hole insert D13mm hole tool I Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. d: 13 mm
ABA article no. ABAAN-09568019
$295.32
Ships in 4 weeks
50052314Klauke
Klauke 50052314 use hole 50,052,314 15.0 mm, hole for tool I Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. d: 15 mm
ABA article no. ABAAN-39844901
$295.32
Ships in 4 weeks
50052322Klauke
Klauke 50052322 use 17.0mm hole 50,052,322 for Punching tool I Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. d: 17 mm
ABA article no. ABAAN-13333381
$295.32
Ships in 4 weeks
50052330Klauke
Klauke 50052330 use hole 50,052,330 21.0 mm, hole for tool I Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. d: 21 mm
ABA article no. ABAAN-83742561
$295.32
Ships in 4 weeks
50052349Klauke
Klauke 50052349 slot insert 6.5x13mm hole tool I Al/Cu rails up to 12mm Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 6.5 x 13 mm
ABA article no. ABAAN-22719564
$645.18
Ships in 4 weeks
50052357Klauke
KLAUKE 50052357 slot use for hole tool 8,5 x16mm Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 8.5 x 16 mm
ABA article no. ABAAN-05764736
$645.18
Ships in 4 weeks
50052365Klauke
KLAUKE 50052365 slot use for hole tool 11,0 x20mm Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 11.0 x 20 mm
ABA article no. ABAAN-69879449
$645.18
Ships in 4 weeks
50052373Klauke
KLAUKE 50052373 slot use for hole tool 13,0 x20mm Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 13.0 x 20 mm
ABA article no. ABAAN-97263722
$645.18
Ships in 4 weeks
50052381Klauke
KLAUKE 50052381 slot use for hole tool 17.0 x20mm Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 17.0 x 20 mm
ABA article no. ABAAN-76918893
$645.18
Ships in 4 weeks
50052659Klauke
KLAUKE 50052659 Standard stamp 95,3mm, steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-71542985
$405.98
Ships in 4 weeks
50053043Klauke
Klauke 50053043 pull bolt 9.5x135mm for shaped hole punch To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved.
ABA article no. ABAAN-38948593
$71.57
Ships in 4 weeks
50063626Klauke
Klauke 50063626 Standard die 79.4mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-19975915
$134.33
Ships in 4 weeks
50063634Klauke
Klauke 50063634 Standard stamp 79.4mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-17427212
$216.61
Ships in 4 weeks
50067290Klauke
KLAUKE 50067290 die 50,067,290 12.5 mm, for slit-punchers systems ISO12 Pg7 Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-88235655
$17.53
Ships in 4 weeks
50069047Klauke
Klauke 50069047 long spacer sleeve Accessories for hydraulic punch. 38 mm, long
ABA article no. ABAAN-10799512
$23.34
Ships in 4 weeks
50069969Klauke
KLAUKE 50069969 standard 12.7mm punches, knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-33332164
$30.15
Ships in 4 weeks
50069977Klauke
Klauke 50069977 Standard die 66.7mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter .
ABA article no. ABAAN-54081845
$117.80
Ships in 4 weeks
50115286Klauke
KLAUKE 50115286 hole use around D = 6.5 mm, hole tool for 50,115,286 Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. d: 6.5 mm
ABA article no. ABAAN-14990511
$526.13
Ships in 4 weeks
50115294Klauke
Klauke 50115294 use around 8.5 mm hole 50,115,294, Hole insert for hole tool III. Suitable for Al/Cu solid and lamella rails up to max. 12 mm and steel up to 10 mm material thickness. d: 8.5 mm
ABA article no. ABAAN-77376142
$526.13
Ships in 4 weeks
50115308Klauke
Klauke 50115308 hole insert D11mm for hole tool III Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. d: 11 mm
ABA article no. ABAAN-74435984
$526.13
Ships in 4 weeks
50115316Klauke
Klauke 50115316 use around 13 mm hole 50,115,316, Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. d: 13 mm
ABA article no. ABAAN-62359143
$526.13
Ships in 4 weeks
50115324Klauke
Klauke 50115324 hole insert D15mm for hole tool III Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. d: 15 mm
ABA article no. ABAAN-63675002
$526.13
Ships in 4 weeks
50115332Klauke
KLAUKE 50115332 use round hole D = 17.0 mm, 50,115,332 Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. d: 17 mm
ABA article no. ABAAN-57074720
$526.13
Ships in 4 weeks
50115340Klauke
KLAUKE 50115340 use round hole D = 21.0 mm, 50.11534 million Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. d: 21 mm
ABA article no. ABAAN-36847362
$526.13
Ships in 4 weeks
50115359Klauke
Klauke 50115359 slot use 6.5 x 13 mm, 50,115,359 Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. 6.5 x 13 mm
ABA article no. ABAAN-88013642
$929.07
Ships in 4 weeks
50115367Klauke
Klauke 50115367 slot use 8.5 x 16 mm, 50,115,367 Hole insert for hole tool III. Suitable for Al/Cu solid and slatted rails up to max. 12 mm and steel up to 10 mm material thickness. 8.5 x 16 mm
ABA article no. ABAAN-59596268
$929.07
Ships in 4 weeks


