Niedax
Showing 1,633–1,680 of 4,664, by part number
KPST80.300/PNiedax
Niedax KPST80.300/P KPST80.300 / P GRP cultivation tee ,, large, 80x300mm, m. shaped connector GRP extension T-piece, large, pressed, with unperforated side rails and molded connector, for creating horizontal 90° T-outlets and crossings of different and the same width, width-dependent in the .
ABA article no. ABAAN-08448061
$177.08
Ships in 4 weeks
KPT50/MNiedax
Niedax KPT 50/M GRP divider 50x3000mm glass fibre reinforced, pultruded, gravel grey GRP divider, pultruded, pre-assembled, for separating cables and lines with different functions and/or voltages, halogen-free. The divider is pre-assembled (riveted) at the factory when ordering the .
ABA article no. ABAAN-50813598
$106.52
Ships in 4 weeks
KPT80Niedax
Niedax KPT80 KPT-80 fiberglass separator, GRP divider, pultruded, for separating cables and lines with different functions and/or voltages, halogen-free. The divider is supplied loose and must be screwed to the cable tray on site. Article .
ABA article no. ABAAN-23375096
$91.78
Ships in 4 weeks
KR100Niedax
Niedax KR100 KR 100 GRP cable racks, GRP cable rake, pressed, for securing the cables using cable ties in the riser shaft, please order 2 pieces of FKM... fastening accessories per cable rake separately, halogen-free. The cable rake is .
ABA article no. ABAAN-69221077
$16.20
Ships in 4 weeks
KR200Niedax
Niedax KR200 KR 200 GRP cable racks, GRP cable rake, pressed, for securing the cables using cable ties in the riser shaft, please order 2 pieces of FKM... fastening accessories per cable rake separately, halogen-free. The cable rake is .
ABA article no. ABAAN-77315068
$21.55
Ships in 4 weeks
KRAB60FNiedax
Niedax KRAB60F profile clamp, boom attachment, H: 57mm feuerverz. Profile clamp boom fastening, for clamp fastening of all-round cable ladders, including hot-dip galvanized fastening accessories. For all-round cable ladders: KRC... KRO... Required: 2 pieces per boom .
ABA article no. ABAAN-12922682
$14.29
Ships in 4 weeks
KRAS60FNiedax
Niedax KRAS60F connection T connector KRAS 60 F, NIEDAX - Make: KRAS 60 F connector, the T-shaped connection of round cable ladders with hollow section side rails and perforated C rungs KRC ... or closed, oval rungs CRO ... dip galvanized to DIN EN .
ABA article no. ABAAN-35018401
$104.62
Ships in 4 weeks
KRBL60FNiedax
Niedax KRBL60F left end attachment KRBL 60 F, NIEDAX - Make: KRBL 60 F end attachment-floor mounting, proper for cable ladders with round hollow section side rails and perforated C insurance KRC ... or closed oval approximately CRO ... for .
ABA article no. ABAAN-62714117
$40.20
Ships in 4 weeks
KRBR60FNiedax
Niedax KRBR60F end attachment KRBR 60 F, NIEDAX - Make: KRBR 60 F End attachment base fixing, for cable ladders with round hollow section side rails with holes KRC ... C rungs, or closed, oval rungs CRO ... for vertical fixing of the .
ABA article no. ABAAN-17730193
$40.20
Ships in 4 weeks
KRC60.125FNiedax
Niedax KRC60.125F cable ladder , 125mm Cable ladder, in accordance with DIN EN 61537, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a 16 mm slot width and continuous hole .
ABA article no. ABAAN-26329680
$1,020.31
Ships in 4 weeks
KRC60.225FNiedax
Niedax KRC60.225F cable ladder KRC 60,225 F, 225mm NIEDAX - Make: KRC 60,225 F . cord conductor to DIN EN 61537, side rails made ​​of hollow sections, with downwardly open shrink-wrapped sprouts from C-section with 16 mm slot .
ABA article no. ABAAN-27856221
$1,028.35
Ships in 4 weeks
KRC60.325FNiedax
Niedax KRC60.325F cable ladder KRC 60.325 F, 325mm NIEDAX - Make: KRC 60.325 F Cable conductor to DIN EN 61537, side rails made of hollow sections, welded with open rungs down from C-section with 16 mm slot width and continuous hole perforation, .
ABA article no. ABAAN-58907268
$1,092.66
Ships in 4 weeks
KRC60.425FNiedax
Niedax KRC60.425F cable ladder with gel. C rungs 60x400x6000mm hot-dip galvanized Cable ladder, in accordance with DIN EN 61537, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a slot width of 16 mm and continuous hole .
ABA article no. ABAAN-63574717
$1,159.66
Ships in 4 weeks
KRCBK60.425FNiedax
Niedax KRCBK60.425F 90 ° bend, small, m., Gel.en C-rungs, 60x400mm feuerverz. 90° bend, small, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a 16 mm slot width and continuous hole perforation, for producing horizontal .
ABA article no. ABAAN-19102548
$1,146.71
Ships in 4 weeks
KRCBK60.625FNiedax
Niedax KRCBK 60.625 F bend 90° small with gel.C-rungs 60x600mm hot-dip galvanized 90° bend, small, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a 16 mm slot width and continuous hole perforation, for producing horizontal .
ABA article no. ABAAN-62938069
$1,715.04
Ships in 4 weeks
KRCF60.425FNiedax
Niedax KRCF60.425F case piece 90 ° ,, vertically, m. gel.en C-rungs, 60x400mm Fall piece 90°, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a 16 mm slot width and continuous hole perforation, for creating vertical 90° .
ABA article no. ABAAN-51087644
$779.36
Ships in 4 weeks
KRCS60.425FNiedax
Niedax KRCS60.425F riser piece 90 ° ,, vertically, with gel.en C-rungs, 60x400mm Riser 90°, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a 16 mm slot width and continuous hole perforation, for creating vertical 90° .
ABA article no. ABAAN-43347641
$779.36
Ships in 4 weeks
KRD200FNiedax
Niedax KRD200F cover cable ladder , 200mm Cover, without cover fastening clamp, for all-round cable ladders. Dimensions (approx. dimensions) H x W: 15 x 206 Delivery length: 3000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO .
ABA article no. ABAAN-10690130
$320.23
Ships in 4 weeks
KRD300FNiedax
Niedax KRD300F cover cable ladder , 300mm Cover, without cover fastening clamp, for all-round cable ladders. Dimensions (approx. dimensions) H x W: 15 x 306 Delivery length: 3000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO .
ABA article no. ABAAN-00061819
$429.76
Ships in 4 weeks
KRDBK60FNiedax
Niedax KRDBK60F cover mounting bracket , Cover fastening clamp, for clamping the Allround cable ladder cover KRD... at a distance above the Allround cable ladder, the attachment takes place on the side rails of the Allround cable ladders, .
ABA article no. ABAAN-40776262
$57.06
Ships in 4 weeks
KRLV60FNiedax
Niedax KRLV60F joint connector KRLV 60 F, NIEDAX - Make: KRLV 60 F joint connector for round cable ladders with side rails and perforated hollow section profile C insurance KRC ... or closed oval approximately CRO ... for preparing for a .
ABA article no. ABAAN-73857963
$74.81
Ships in 4 weeks
KRMPH280FNiedax
Niedax KRMPH280F Galvanized KRMPH 280 F mounting plate for horizontal mounting Mounting plate for horizontal installation of distribution and junction boxes between the rungs of all-round cable ladders, fastening is carried out using the clamping function of the KRTB 6 F .
ABA article no. ABAAN-31267724
$108.31
Ships in 4 weeks
KRMPV280FNiedax
Niedax KRMPV280F Galvanized KRMPV 280 F mounting plate for vertical mounting Mounting plate for vertical mounting of distribution or junction boxes on the hollow profile side rails of all-round cable ladders KRC... and KRO... and their fittings, including proportional hot-dip .
ABA article no. ABAAN-98195449
$138.12
Ships in 4 weeks
KRO60.325FNiedax
Niedax KRO60.325F CRO 60.325 F cable ladder , 60x325mm galvanized Cable ladder, in accordance with DIN EN 61537, side rails made of hollow profiles, with welded, closed, oval rungs. Dimensions (approx. dimensions) H x W: 60 x 300 mm Material thickness: 1 mm Rung .
ABA article no. ABAAN-28601004
$1,121.48
Ships in 4 weeks
KRSK60Niedax
Niedax KRSK60 KU end cap yellow 60x20mm plastic PE KU end protection cap, for covering/closing the ends of the Allround cable ladders and their fittings, halogen-free. The end protection cap must be installed in personal danger areas! Use for: .
ABA article no. ABAAN-93350871
$3.08
Ships in 4 weeks
KRTB6FNiedax
Niedax KRTB6F KRTB 6 F fastener for, Divider / mounting plates galvanized Fastening element for divider/mounting plate, for fastening the dividers and the mounting plate using a clamping function to the rungs of the all-round cable ladders, please order the corresponding .
ABA article no. ABAAN-28779421
$21.21
Ships in 4 weeks
KRUV60FNiedax
Niedax KRUV60F joint connector H: 61mm, feuerverz. DIN EN ISO 1461 Joint connectors for creating vertical/horizontal angle connections of continuous all-round cable ladders, including hot-dip galvanized fastening accessories. For all-round cable ladders: KRC... KRO.
ABA article no. ABAAN-71221622
$80.05
Ships in 4 weeks
KRWB60.25FNiedax
Niedax KRWB60.25F wall mounting KRWB 60.25 F, 60x25mm NIEDAX - Make: KRWB 60.25 F Wall mounting for round cable ladders with hollow section side rails and perforated C rungs KRC ... or closed, oval rungs CRO ... for wall mounting of the all cable .
ABA article no. ABAAN-72788240
$27.02
Ships in 4 weeks
KRWB60.75FNiedax
Niedax KRWB60.75F wall mounting KRWB 60.75 F, 60x75mm NIEDAX - Make: KRWB 6 .75 F Wall mounting for round cable ladders with hollow section side rails and perforated C rungs KRC ..., or with closed oval rungs CRO ... for wall fixing of round cable .
ABA article no. ABAAN-13977359
$30.26
Ships in 4 weeks
KSR20ANiedax
Niedax KSR20A cable protection ring with UV protection 14.5x58mm plastic PP black NIEDAX - Make: KSR 2 A Cable protection ring, for use in the side perforation of distribution channels RSV 5 ... and industrial channels of LS-6 LI ... and subsequently introduced into the cable .
ABA article no. ABAAN-05248318
$3.52
Ships in 4 weeks
KSR30ANiedax
Niedax KSR30A cable protection ring with UV protection 24x58mm plastic PP black NIEDAX - Make: KSR 30 A Cable protection ring, 50 for use in the base perforation of distribution channels .. RSV, LS-industry channels LI 60 .. and in the holes of the agent release profiles of .
ABA article no. ABAAN-57577459
$3.52
Ships in 4 weeks
KSR40ANiedax
Niedax KSR40A cable protection ring with UV protection 34.5x144.5mm plastic PP black. NIEDAX - Make: KSR 4 A Cable protection ring, used for side and base perforation of distribution channels RSV ..., Black elastic insulating plastic PP with UV protection, to protect the cable from .
ABA article no. ABAAN-44086783
$5.39
Ships in 4 weeks
KSV100FNiedax
Niedax KSV100F joint connector H100mm hot-dip galvanized DIN EN ISO 1461 Joint connectors for creating a form-fitting, longitudinally aligned connection, including hot-dip galvanized mounting accessories. Potential equalization is achieved by screwing to the cable ladder .
ABA article no. ABAAN-70246400
$18.53
Ships in 4 weeks
KSV100SNiedax
Niedax KSV100S connector, * Joint connectors for creating a form-fitting, longitudinally aligned connection, including hot-dip galvanized fastening accessories. The potential equalization is achieved by screwing to the cable .
ABA article no. ABAAN-63746684
$15.29
Ships in 4 weeks
KSV60/320E3Niedax
Niedax KSV 60/320 E3 joint connector 60x320mm Joint connectors for creating a form-fitting, longitudinally aligned connection, including appropriate stainless steel fastening accessories. Potential equalization is achieved by screwing to the .
ABA article no. ABAAN-81407820
$30.26
Ships in 4 weeks
KSV60/320SNiedax
Niedax KSV 60/320 S joint connector 60x320mm Joint connectors for creating a form-fitting, longitudinally aligned connection, including hot-dip galvanized fastening accessories. The potential equalization is achieved by screwing to the cable .
ABA article no. ABAAN-40805685
$13.51
Ships in 4 weeks
KSV60E3Niedax
Niedax KSV60E3 connector KSV 60 E3 NIEDAX - Make: KSV 60 E3 Joint connector for the manufacture of straight joints connections for cable ladders and cable ladders, in stainless steel, material no. 1.4301, including share-moderate .
ABA article no. ABAAN-29262490
$18.76
Ships in 4 weeks
KSV60E5Niedax
Niedax KSV 60 E5 joint connector H=60mm stainless steel, including accessories Joint connectors for creating a form-fitting, longitudinally aligned connection, including appropriate stainless steel fastening accessories. Potential equalization is achieved by screwing to the .
ABA article no. ABAAN-40750199
$23.79
Ships in 4 weeks
KSV60FNiedax
Niedax KSV60F connector KSV 60 F, hot-dip galvanized NIEDAX - Make: KSV 60 F joint connector, for the production of straight joints connections for cable ladders and cable ladders, dip galvanized to DIN EN ISO 1461, including share-dip galvanized .
ABA article no. ABAAN-86043669
$9.82
Ships in 4 weeks
KSV60SNiedax
Niedax KSV60S connector KSV 60 S, NIEDAX - Make: KSV 60 S Joint connector for the manufacture of straight joints connections for cable ladders and cable ladders, galvanized to DIN EN 10346, including dip galvanized share moderate .
ABA article no. ABAAN-88772268
$8.71
Ships in 4 weeks
KSWAES400.200FNiedax
Niedax KSWAES400.200F KSWAES 400 200 F terminal adapter 45 ° galvanized, Adapter for 45° boom arrangement on concrete beams, please order required fastening accessories on concrete beams, such as 4 x dowels / push-through anchors (taking into account the current dowel .
ABA article no. ABAAN-18645477
$678.87
Ships in 4 weeks
KTA100Niedax
Niedax KTA100 wall bracket KTA 100, 45x110mm NIEDAX - Make: KTA arm and wall bracket, standard, hot-dip galvanized to DIN EN ISO 46 Including galvanized share moderate fixing accessories.Capacity at L / 2: 2.5 kN Dimensions H x L: 45 x mm .
ABA article no. ABAAN-37828645
$17.98
Ships in 4 weeks
KTA1000Niedax
Niedax KTA1000 wall bracket KTA 1000 standard galvanized 150x1010mm NIEDAX - Make: KTA Arm and wall bracket, standard, hot-dip galvanized to DIN EN ISO 46 Including galvanized share moderate fixing accessories. Capacity at L / 2: 3.5 kN Dimensions H x L: .
ABA article no. ABAAN-73684153
$137.45
Ships in 4 weeks
KTA100C1KGNiedax
Niedax KTA100C1KG KTA 100 C1KG Hägestiel u., Wall bracket standard 45x110 mm, 2.5 kN Hanging support and wall bracket, standard, for wall and hanging support mounting, including appropriate fastening accessories in stainless steel, material no. 1.4571. The load-bearing capacity .
ABA article no. ABAAN-84814555
$63.53
Ships in 4 weeks
KTA100E3Niedax
Niedax KTA100E3 wall bracket standard KTA 100 E3 Stainless 45xx110mm NIEDAX - Make: KTA 100 E3 arm and wall bracket, standard, in stainless steel, material no. 1.4301, including share-moderate mounting accessories in stainless steel. capacity at L / 2: 2.5 kN .
ABA article no. ABAAN-68437657
$67.44
Ships in 4 weeks
KTA100E5Niedax
Niedax KTA100E5 hanging handle/wall bracket standardD45X110mm 2.5 kN stainless steel Hanging support and wall bracket, standard, for wall and hanging support mounting, including appropriate fastening accessories in stainless steel, material no. 1.4571, AISI 316Ti. The load-bearing .
ABA article no. ABAAN-20828063
$80.05
Ships in 4 weeks
KTA150Niedax
Niedax KTA150 wall bracket KTA 150, 45x160mm NIEDAX - Make: KTA 150 Arm and wall bracket, standard, hot-dip galvanized to DIN EN ISO 1461, including galvanized share moderate fixing accessories. Capacity at L / 2: 2.5 kN Dimensions H .
ABA article no. ABAAN-63088823
$20.10
Ships in 4 weeks
KTA150C1KGNiedax
Niedax KTA150C1KG KTA 150 C1KG Hägestiel u., Wall bracket standard 45X160 mm, 2.5 kN Hanging support and wall bracket, standard, for wall and hanging support mounting, including appropriate fastening accessories in stainless steel, material no. 1.4571. The load-bearing capacity .
ABA article no. ABAAN-94386936
$74.81
Ships in 4 weeks

